---

"D" TYPE IMPACT DEVICE

The ENPAIX durometers are fitted with universal impact device D.
The impact device allows high precision measurements at any angle.
It's used to measure all the materials with thickness not less than 3mm and weight not less than 5kg. The pieces that don't have these features can also be measured using appropriate actions (e.g.: by fixing the piece on a granite surface).

TECHNICAL SPECIFICATION:

Impact energy	11Nmm
Mass of the impact body	5.5g
Test tip diameter	3mm
Test tip material	Tungsten carbide
Test tip hardness	1600HV
Impact device length	147mm
Impact device diameter	20mm
Impact device weight	75g
Max. hardness of sample	940HV
Min. weight of the sample:
of compact shape	5kg
on solid support	2kg
coupled on plate	0.05kg
Min. thickness of sample:
uncoupled	25mm
coupled	3mm
surface layer thickness	0.8mm
Indentation size on test surface with 300HV, 30HRC:
diameter	0.54mm
depth	24µm
Indentation size on test surface with 600HV, 55HRC:
diameter	0.45mm
depth	17µm
Indentation size on test surface with 800HV, 63HRC:
diameter	0.35mm
depth	10µm

---

MINI THERMAL PRINTER WIRELESS

With his mini thermal printer in equipment, you can print the report with test data, measured values, lot identification and the mean value.
The hardness tester communicates with the printer via wireless quickly and easily for immediate measurements certification.

TECHNICAL SPECIFICATION:

Print method	Thermal line printing
Print font	ASCII (24x12) - GBK (24x24)
Print speed (max)	50mm/s
Interface	IrDA or Bluetooth
Paper dimensions	58mm (2inch)
Paper thickness	0.06 ~ 0.07mm
Power	7.2V Ni-MH battery
Power consumption	0.4A
Commands	Compatible ESC/POS
Operating temperatures	-10 ~ 50°C
Operating humidity	20 ~ 85%
Storage temperatures	-20 ~ 70°C
Storage humidity	5 ~ 95%
Accessories	Roll paper, charger
Overall dimensions	76x96x36mm
Mass	approx. 220g