-

-

-

   The Boresight SA is a small telescope which is used in connection with an insert rod for checking and adjusting parallelism of the barrel axis to the line of sight (direct line between the head of a missile and its target in the weapon's aim).
   It can be used for different calibres and for axis' alignment. In the traditional mechanical industry, it is used successfully in the alignment of the machineries: guides, carts, chargers of bars and pipes for machine tools, etc. It can be adjusted from a distance of 0.5 m to infinity.

 

-

-

-

-

-

-

   The Zoom Light Scale is a new optical measuring device with variable magnification with a “10-15-20x” zoom, able to measure or quickly inspect in production small objects, just keeping them in a hand.
   Usually the optical devices have a glass scale of measurement at their basis (thickness 1-2mm) and the inspections or the measurements are possible only if the lens is leant on a perfectly flat surface.
   The Zoom Light Scale is equipped with a metallic scale half circle-shaped with 100 decimal divisions, allowing that the objects (like for example cutting tools) could be softly leant on it and eventually tilted also toward the internal part of the lens.
   The focusing system uses an accurate ring nut, the high resolution of its lenses and the good led illumination ensure an optimal vision and accurate measurements.

-

-

-

-

-

-

-

3713
3713-L

-

-

-

-

-

-

-

 

   The Peak Long Distance Microscope LDM-40 consists of a Wide Stand Microscope 40X and an objective unit. The objects being inspected can be enlarged sharply at short distance of 200 mm as well as at a long distance.
   How to use: First, set the distance from the LDM-40 to the object on the working distance mark shown on the side of barrel. Then, bring the object into focus by adjusting a helicoid ring.
   A cross hair reticle is provided in the eye-piece of  Wide Stand Microscope. For the objective we adopt collimating lens system. There is a hole on the lower part of this instrument to fix a supporting stand such as a tripod.
   Visual inspection as well as measuring will be made easily when you use the supporting stand you like.
   When you remove the objective unit from the microscope and attach an acrylic base (in outfit) to the body of the microscope you can use it as the Wide Stand Microscope 40X (pen light unit to be purchased separately). (See item 2034).

2034

Working distance	200	300	400	500	Infinite
Magnification	27X	15X	10X	8X
Field of view ø mm	5.5	10	15	19
Size (mm)	46x316	46x292	46x282	46x277	46x262
Weight (g)	414	414	414	414	414

 

   In our life not little times happened we wish to thank someone with a small present not so much binding, but of good quality, original and overall useful in time.
   Well, the Pocket microscope 15x and the table achromatic magnifying hand lens is the duet that all are pleased to receive. The lens with diameter 55mm is of achromatic type, double lens (without chromatic aberrations and the lines that are observed through it are perfectly straight and clear from centred to the edges), the handle is obtained by precious rose wood.
   The pocket microscope 15x (field of view 19mm) is a precious quality object, like a pen, it can be putted easily in the pocket and when it will be extract to inspect objects, will satisfy the observer and will create non little curiosity in the presents. The duet is supplied in a present box.