Page:     
 Category: Loupes, Linen Testers, Pocket Microscopes, Focusers
   

PEAK WIDE STAND MICROSCOPE

   Peak Wide Stand Microscope is a simple measuring microscope designed to be compact and light weight like the Stand Microscope, but characterized by a wider field of view than the conventional ones. It allows not only to provide magnified view of fine pattern and contour of object, but also to measure length and compare the dimensions by using a scale built-in the eye-piece.
   The standard 2034 series has always been equipped with sliding helical mechanism for the focusing while in the 2054 series the focusing is made through rack movement controlled by two knobs on the sides of the microscope.
   The 2054 EIM series is provided also with an optic system which allows the erect vision of an image.
   The 2034/2054 CIL series differs from the 2034/2054 series because it is also equipped  with an axial light source. This particular type of illumination allows to inspect also irregular surfaces (small holes, cracks, notches) without shadows and then the vision is sharp and detailed.

2034
2034 CIL
2054
2054 EIM
2054 CIL
    See also: Pen Light / Roll video

 
Item No.
2034-20
—
2054-20
2054-20EIM
—
2034-40
2034-40 CIL
2054-40
2054-40 EIM
2054-40 CIL
2034-60
2034-40 CIL
2054-60
2054-60 EIM
2054-60 CIL
2034-100
2034-100 CIL
2054-100
2054-100 EIM
2054-100 CIL
2034-150
2034-150 CIL
2054-150
—
2054-150 CIL
2034-200
2034-200 CIL
2054-200
—
2054-200 CIL
2034-300
2034-300 CIL
2054-300
—
2054-300 CIL
Magnific.
20X
40X
60X
100X
150X
200X
300X
Field of
view
7.2 mmø
3.6 mmø
2.4 mmø
1.45 mmø
0.96 mmø
0.72 mmø
0.48 mmø
Min. scale
division
No.54
0.1mm
No.64
0.05mm
No.74
0.02mm
No.84
0.01mm
No.94
0.005mm
No.104
0.002mm
No.114
0.001 mm
Min. scale
division
No.57
0.005"
No.67
0.002"
No.77
0.001"
No.87
0.0005"
No.97
0.0002"
No.107
0.0001"
-
Measuring
range
6.0 mm
3.0 mm
2.0 mm
1.2 mm
0.9 mm
0.6 mm
0.4 mm
Measuring
range
0.236"
0.118"
0.078"
0.047"
0.035"
0.023"
-
Working
distance
36.0 mm
18.7 mm
10.8 mm
5.7 mm
9.2 mm
6.7 mm
4.0 mm
Numerical
aperture
0.06
0.12
0.15
0.19
0.24
0.35
0.4
Focal
distance
35.0 mm
22.0 mm
16.5 mm
10.7 mm
7.3 mm
5.7 mm
3.9 mm
Sizes and net weight of each item (accessories excluded)
Item No. 2034-20/300 2054-20/300 2054-20/100 EIM
Size 63ø x 172 mm 69ø x 172 mm 69ø x 172 mm
Net weight 237-241 gm. 263-267 gm. 260-264 gm.
 

  OPTIC ROLL MICROSCOPE   

    Examining a curved surface with the traditional portable microscopes is often difficult; observing the surfaces and even measuring could be unreliable because of the instability due to the conformation of these microscopes stand, which is not suitable to be set on curved surfaces.
    Now the Roll series can be placed also on these surfaces (for instance, cylinders and engraved rolls for the printing sector, etc.) and make accurate inspections and measurements also with high magnifications. Several persons will be able to see and comment the same observation point because the instrument is firmly positioned.
    The fast and reliable positioning is guaranteed by a particular stand which allows the microscope to inspect rolls up to a minimum 80mm diameter; while it is available the Rolls Plus (optional) for rolls below 80mm and up to 10mm.
    In order to allow the observer an optimal vision of the examined surface and carry on them the beam of light coming from the light pen, the stand is revolving.
    The Roll series also includes the version with magnetic stand M-Roll which allows, where possible, the microscope to be positioned also at 90° without bringing the magnets into direct contact with the surfaces.
    The whole range of the optical microscopes of the ROLL and M-ROLL series is available in video colour and B&W version and use interchangeable objectives with magnetic connection for magnifications from 15x and 1150x (with CIL COAXIAL until 2800x).
    For particular requirements (especially in the sector of general engraving) the CIL ROLL series is now available which, besides having all the features of the previous series, has the prerogative to be also equipped with a system of coaxial light.
    All these small and cheap videomicroscopes, have been designed with the intention of facilitating the user in bringing and using them.
    For those who have already Peak microscopes of the 2009 SHOP / 2034 WIDE / 2054 / 2054 CIL series it is now available a specific Stand Roll which allows to integrate the microscope in order to allow the optical vision on curved surfaces.


2034 ROLL
2034 CIL ROLL
2054 ROLL
2054 EIM ROLL
2054 M-ROLL
2054 EIM M-ROLL
 

2054 CIL M-ROLL

2054 CIL ROLL

M=magnetic
CIL=coaxial light
EIM=erect image


Stand for roll series

Rotary-magnetic system
 
Optical microscopes
- 2054 / 2054-CIL / 2054-EIM
- 2034 / 2034-CIL series

STANDARD OPTIC MICROSCOPE (20X......300X)
NEW OPTIC ROLL MICROSCOPE
(20X......300X)
Item no.

Min.
scale
division
(mm)

Item no.

Min.
scale
division
(mm)

2054-20
0.1
2054-20 Roll
0.1
2054-40
0.05
2054-40 Roll
0.05
2054-60
0.02
2054-60 Roll
0.02
2054-100
0.01
2054-100 Roll
0.01
2054-150
0.005
2054-150 Roll
0.005
2054-200
0.002
2054-200 Roll
0.002
2054-300
0.001
2054-300 Roll
0.001
 
2054-20 EIM
0.1
2054-20 EIM Roll
0.1
2054-40 EIM
0.05
2054-40 EIM Roll
0.05
2054-60 EIM
0.02
2054-60 EIM Roll
0.02
2054-100 EIM
0.01
2054-100 EIM Roll
0.01
 
2054 CIL-40
0.05
2054 CIL-40 Roll
0.05
2054 CIL-60
0.02
2054 CIL-60 Roll
0.02
2054 CIL-100
0.01
 2054 CIL-100 Roll
0.01
2054 CIL-150
0.005
 2054 CIL-150 Roll
0.005
2054 CIL-200
0.002
 2054 CIL-200 Roll
0.002
2054 CIL-300
0.001
 2054 CIL-300 Roll
0.001

2034 CIL-40
0.05
2034 CIL-40 Roll
0.05
2034 CIL-60
0.02
2034 CIL-60 Roll
0.02
2034 CIL-100
0.01
2034 CIL-100 Roll
0.01
2034 CIL-150
0.005
2034 CIL-150 Roll
0.005
2034 CIL-200
0.002
2034 CIL-200 Roll
0.002
2034 CIL-300
0.001
2034 CIL-300 Roll
0.001
 
 2034-20
0.1
2034-20 Roll
0.1
2034-40
0.05
2034-40 Roll
0.05
2034-60
0.02
2034-60 Roll
0.02
2034-100
0.01
2034-100 Roll
0.01
2034-150
0.005
2034-150 Roll
0.005
2034-200
0.002
2034-200 Roll
0.002
2034-300
0.001
2034-300 Roll
0.001
The "Roll" series can be also provided with magnetic rolls.


For the series of optical microscopes, interchangeable objectives are available

 
Magnification
2X
4X
10X
15X
20X
30X
Code
ML-2
ML-4
ML-10
ML-15
ML-20
ML-30
Working distance
36.0 mm
18.7 mm
10.8 mm
5.7 mm
9.2 mm
6.7 mm
Numerical aperture
0.06
0.12
0.15
0.19
0.24
0.35
Focal distance
35.0 mm
22.0 mm
16.5 mm
10.7 mm
7.3 mm
5.7 mm
 
   

PEAK HEAD LUPE

   The Peak Head Lupe is an extremely lightweight head-lupe and permits bright, wide and 3-Dimensional views by two angle lenses suitable for eyes.
   A person wearing glasses can use this lupe with their glasses on. This lupe is easily attached/detached by a magic-tape headband, allowing users to use both their hands freely.
   This lupe, equipped with a magnifying power of 2.2X, can be used for even more precise inspection by adding another pair of enclosed angle lenses which provide a magnifying power of 3.3X. It is possible to have variation from 4.1X to 5.2X, besides having 2.2X and 3.3X, moving in front of your eye a third mono-ocular lens already mounted on the Lupe.
   Superior functions of this loupe are best suited for such operations as professional precision processing. photoengraving, photography, and this lupe also serves in hobbies of model assembling, engraving and precision drawings. Use alcohol to clean lenses. Other chemicals will whiten the lenses because the lenses are made of resin.

2035 II

Head Lupe

Magnification: - 2.2X, 3.3X, 4.1X & 5.2X
Size: - 190 x 70 x 258 mm
Net weight: - 118 gm.
 

PEAK POCKET MEASURING MICROSCOPE

   We have newly selected the models of 25X and 50X out of Peak Pocket Microscope series, in which we incorporated scales in their lens barrel, as shown in the picture.
   The Microscope can be focused in the same way as in our microscopes so far supplied. Observe an object by holding the unit with the notch of acrylic-cylinder point in front of you, with the centre of the lens placed about right over the specimen, tilting the cylinder towards forward and backward while applying an eye to the eye lens and setting the unit at an angle of catching the object clearly.

2036

Pocket
Microscope

 Item No. 2036-25 2036-50
Magnification 25X 50X
Field of view 3.30ømm 2.00ømm
Min. scale division 0.05mm 0.02mm
Measuring range 3.0mm 1.6mm
Size 12.4ø x 127 mm
Net weight 12 gm. 12 gm.
   See also: 2050
 
 

PEAK SCALE LUPE 30X -
PEAK LIGHT SCALE LUPE 30X

   Peak Lupe 30X has been an enjoying favourable reception from customers; it is a loupe of high magnification by the design of 4 elements, 2 groups, allowing erect image vision. This excellent magnifier is now fitted with a glass scale to meet the demands from the many different sectors. Thereby is possible to measure and compare the object to be inspected over the entire effective visual field of 7 mm.
   Insufficient supply of light has been improved by attaching to the Peak Scale Lupe 30X an illuminating device consisting of the penlight and the holder. Observations can be achieved more easily than ever.

2037

Scale
Lupe 30X

Item No. 2037 2037-L
Magnification 30X 30X
Effective aperture 7 mm 7 mm
Size (mm) 30øx19 43øx65x184
Net weight 16 gm. 48 gm.
Scale length 5 mm 5 mm
Min. Scale Division 0,05 mm 0,05 mm
   See also: 2016 / 2055 / Pen Light / Scales
 

PEAK LUPE 4X

   Peak Lupe 4X uses a high-resolution achromatic lenses. With its wide square vision of 45x45 mm and a clever and smart design of its body, it will be useful not only in your daily life but also in various fields as an able assistant for precision works. Particularly, semi-transparent and black bottom skirts are provided which are very convenient for observation if you select anyone of them depending upon lighting conditions. For instance, you may use the semi­transparent skirt for checking photographic films, and may install the black skirt for checking the focus of a large-format camera. In addition, for the focus adjustment of this loupe, a multi-groove screw helicoid system is adopted. The neck strap provided, will also increase operational efficiency several times.


2038

Lupe 4X


Magnification:

-
4X
Field of view:
-
 45 x 45 mm
Size:
-
 51 x 65 x 51 mm
Net weight:
-
 80 gm.
   See also: 1990-4 / 2052
   

PEAK MIRROR STEREO VIEWER

   Peak Mirror Stereo Viewer is used to solid-geometrically view and investigate stereo pictures, especially aerial photographs, and is an indispensable tool for surveys in agriculture, forestry, civil engineering, architecture, regional development projects, etc.
   The equipment consists of the viewer body mainly composed of the optical system and the mirror section in which optical plank are fixed. One of the legs is provided with a length adjusting device so that the equipment is supported stably during the observations.
   The loupe can be set with a single action, and replaced with "2039 BINO" - 4X - depending on the application.

2039

2039 BINO

Base line spacing:
-
 260 mm
Magnification
of loupe:
-
 1.8X
Field of view without loupe:
-
 260x200 mm
Field of view
with loupe:
-
 210x150 mm
Maximum
size set up:
-
 713x267x255 mm
Net weight:
-
 2,650 gm.
   See also: 1994
   Home Page Top