Accessories for Jumbo Lite
Transformation kit from Jumbo Lite to Work Station Jumbo:
JUMBO CONTROL software (code SPT OVT 000515),
Emergency stop (code SPT OVT 000500),
Cable with stop micro-switch (code SPT OVT 000502),
DIB 9 serial cable (code SPT MEL 000314)
code SPT OVT 000514
Couple of magnetic 90° angulars, they allow to keep perfectly lined up and perpendicular to the objective of the video system very thin or difficult to handle objects (i.e. cross sections of metal laminae, sheets of paper, plastic, etc).
MAGNETIC STAND-UP 25
code SPT OVT 000489
MAGNETIC STAND-UP 50
code SPT OVT 000490
MAGNETIC STAND-UP 70
code SPT OVT 000491
This accessory is very useful when you want to inspect and to measure with video systems small tools like drills - cutters, etc. with diameters from 1,5 and 30 mm. The little chuck is equipped with dividing notches of 5° up to 360° and it can be manually turned for the inspection of the surfaces of the tools, if used with the Magnetic Stand-Up 70 and a viewer (like our SLIM 4 x5 ") you will have at disposal a kit of extraordinary practicality for the control and measure of profiles in many applications.
code SPT OVT 000494
| SMALL METALLIC PRISM
for the perfect stability of cylindric objects in horizontal position
code SPT OVT 000621
magnetic and made in metal, matchable one on the other or with other couples; useful to raise the VCR Stands when you want to examine smal three-dimentional objects.
code SPT OVT 000626
Stand XY complete of stage "x-y 10 mm"
VCR stand: Stand complete of stage "x-y 10mm"
with magnetic rolls
code STAND PRM 10178
Stand CX for coaxial light
code STAND PCX 10179
complete of magnetic rolls
code STAND CXM 10228
As an alternative to the VCR's standard head
(code SPT OVT 000388)
if you wish to measure also the Z axe directly on the workplace.
code VCR-ZL P 10360
(for further information please refer to the
page dedicated to the VCR-ZL series)
Monitor TFT 17"
for the use of the Jumbo without a PC
code SPT MON 000495