EXPLORE
SEE ALSO

Accessories for Jumbo Zoom






MAGNETIC STAND-UP


Couple of magnetic 90° angulars, they allow to keep perfectly lined up and perpendicular to the objective of the video system very thin or difficult to handle objects (i.e. cross sections of metal laminae, sheets of paper, plastic, etc).


MAGNETIC STAND-UP 25
Dimensions: 25x25x15mm
code SPT OVT 000489

MAGNETIC STAND-UP 50
Dimensions: 50x50x15mm
code SPT OVT 000490

MAGNETIC STAND-UP 70
Dimensions: 70x70x75mm
code SPT OVT 000491





      

MAGNETIC MINI-CHUCK


This accessory is very useful when you want to inspect and to measure with video systems small tools like drills - cutters, etc. with diameters from 1,5 and 30 mm. The little chuck is equipped with dividing notches of 5° up to 360° and it can be manually turned for the inspection of the surfaces of the tools, if used with the Magnetic Stand-Up 70 and a viewer (like our SLIM 4 x5 ") you will have at disposal a kit of extraordinary practicality for the control and measure of profiles in many applications.

code SPT OVT 000494

Stand XY complete of stage "x-y 10 mm"
code STAND PRO 10177

Stand complete of stage "x-y 10mm"
with magnetic rolls
code STAND PRM 10178
Stand CX for coaxial light
code STAND PCX 10179
Magnetic base
complete of magnetic rolls
code STAND CXM 10228
Spacer ring (height 43mm) for VCR body useful in a few cases when distancing more with the objective from the target is necessary
code SPT OVT 000396
As SPT OVT 000396 but with heigth 24mm
code SPT OVT 000399
  Camera
colour CCD1/2", high resolution, complete of power supply.

code SPT SIC 000382
  Camera
B&W CCD1/2", high resolution complete of power supply.

code SPT SIC 000022
SMALL METALLIC PRISM
for the perfect stability of cylindric objects in horizontal position

code SPT OVT 000621

PRISMS'S COUPLE

magnetic and made in metal, matchable one on the other or with other couples; useful to raise the VCR Stands when you want to examine smal three-dimentional objects.
code SPT OVT 000626





Kit of transformation from Jumbo Zoom to Work Station Jumbo:
Software JUMBO CONTROL (code SPT OVT 000515),
Emergency stop (code SPT OVT 000500),
Cable with stop micro-switch (code SPT OVT 000502),
DIB 9 serial cable (code SPT MEL 000314)
code SPT OVT 000514
 
Kit firewire interface
for images acquisition
(no measurement software and automatic focusing)
code FIR 10129
Video Cross Double Check
code SPT OVT 000266
Digital Cross Generator
code SPT OVT 000464
Monitor TFT 17"
to use Jumbo without the PC
code SPT MON 000495