EXPLORE
SEE ALSO

STAND EXPLORER
(code SE 10169)


STAND EXPLORER + VCR
STAND EXPLORER + VCR-ZLite
STAND EXPLORER + ZOOM Objective
SE-VCR
SE-VCR-ZLite
SE-ZOOM
(code SE-VCR 10274)
(code SE-VCR 10275)
(code SE-ZOOM 10277)

   Reliability, modularity, precision in the measurements, wide range of accessories and low price: these are the characteristics concerning the new videomicroscopes SE series.
   These new devices have been designed appositely for medium and small companies, which wish to be in possess of a good instrument for the production quality check, with the possibility to get and archive files containing the tries with pictures, measurements and comments.
   The SE series is composed by three models, two of which, SE-VCR and SE-VCR-ZLite, have interchangeable objectives with magnetic mount, with a magnification range included between 10x and 2350x (referring to a 14'' monitor) and a field of view from 24x18 to 0,12x0,09mm; the third model, SE-ZOOM has a zoom objective and a "jerky magnification selection", to ensure the repeatability of the measurements.
   The SE-VCR-ZLite model, differs from the SE-VCR model, because it's equipped with a further system for the checking and measuration of the depths (small fissures, cracks, etc.) "Z" axe with a precision 0,5-1 hundredth; each model is provided of a movable mechanical stage x-y with a range of movement of 75x50mm, where a sensor of movement placed on the y axis through a display, guarantees very accurate measurements (0,03mm on distances of 75mm).
   With this kind of mechanical stage and the magnification of the image on a monitor, everyone could easily point the beginning and the end of the distance to measure.
   Common videomicroscopes aren't able to measure, with centesimal precision, distances higher than few millimeters, if they haven't at disposal telecentric objectives or any kind of other expensive accessory.
   Two kinds of illuminations are mountable on any of these 3 models: diascopic and episcopic; the first is of the ultrabright led annular type, with luminous intensity variator; while the light of the second is spreaded and offers nice results in the profiles' vision and measurement.
   Since SE-VCR and SE-VCR-ZLite use their respective video headers of the well known VCR series, the whole range of their "precious" accessories is employable, sostaining our concept of "modularity" in the designing and in the manufacturing of working devices, which has always been the main characteristic of our company's philosophy.
   These accessories allow to increase quitely the chance of use, so, for example, the use of a small auto-illuminating base will be enough to make them transportable and ready to measure wide and heavy, flat and curved surfaces just leaning the device on those surfaces.
   The SE system in outfit includes also the connection to PC through external USB2.0 interface, complete of software able to acquire high-quality images, make comparisons between the images acquired, make film segments, etc., while if you wish to make all the most common measurements, the control of the focusing (for accurate and ripetitive measurements), we have a dedicated software for the viewing and the measurement of objects.


SOFTWARE
VIDEO VIEW light: Software for the vision of the images coming from a video source.
VIDEO VIEW basic: Software for the vision and measurement in 2D of the images coming from a video source.
VIDEO VIEW pro: Measuring and control software for object through devices for video magnifications.
VideoKLite: Software for automatic and semi-automatic focusing, acquisition, comparison and measurement of the images in live.




ZOOM OBJECTIVES MECHANICAL STAGES


ACCESSORIES

Cold light Arms:
Light with two semi-rigid arms, high intensity light
working at 12V and low consumption.
Equipped with magnetic connection to be easily positioned.
Technical data:
Power: 12V; Absorption: 40 mA
Arms length: 37 mm; Weight: 130 g
code SPT OVT 000369


Cold Light Ring 24
Illuminator with 24 leds magnetic connection, possibility of changing the luminous intensity and the origin corner of the lighting beam in 14 patterns. The optimal lighting is included between about 10 and 32 mm from the target.
code SPT OVT 000620
Set CX light
complete of magnetic spacers and objective CX-200.
code SPT OVT 000462
Additional spacer to be used on stand SE-VCR and TDE with set for coaxial light of the VCR series.
code SPT OVT 000463

Spacer ring (height 43mm) for VCR body
useful in a few cases when distancing more with
the objective from the target is necessary
code SPT OVT 000396


As SPT OVT 000396 but with heigth 24mm
code SPT OVT 000399






MAGNETIC STAND-UP


Couple of magnetic 90° angulars, they allow to keep perfectly lined up and perpendicular to the objective of the video system very thin or difficult to handle objects (i.e. cross sections of metal laminae, sheets of paper, plastic, etc).


MAGNETIC STAND-UP 25
Dimensions: 25x25x15mm
code SPT OVT 000489

MAGNETIC STAND-UP 50
Dimensions: 50x50x15mm
code SPT OVT 000490

MAGNETIC STAND-UP 70
Dimensions: 70x70x75mm
code SPT OVT 000491





      

MAGNETIC MINI-CHUCK


This accessory is very useful when you want to inspect and to measure with video systems small tools like drills - cutters, etc. with diameters from 1,5 and 30 mm. The little chuck is equipped with dividing notches of 5° up to 360° and it can be manually turned for the inspection of the surfaces of the tools, if used with the Magnetic Stand-Up 70 and a viewer (like our SLIM 4 x5") you will have at disposal a kit of extraordinary practicality for the control and measure of profiles in many applications.

code SPT OVT 000494
MINI METALLIC PRISM
for the perfect positioning of cylindrical objects
in horizontal position

code SPT OVT 000621

COUPLE OF PRISMS

Magnetic, made of metal, positionable in piles and matchable with other couples, useful to raise stand VCRs when you want to examine small three-dimensional objects.
code SPT OVT 000626


Vice with magnetic connections for XY stage
code SPT TDE 000220
Digital Cross Generator
Small electronic device able to superimpose
on a video image video two axis (x and y) in positive
or negative in a wished point of the screen.
(without the use of any PC)

code SPT OVT 000464


AVAILABLE OBJECTIVES FOR VCR WORKING WITH ANNULAR LIGHT
(compatible with STAND-SE)


Interchangeable objectives
with magnetic mount
Microcamera with CCD 1/3" Cylinder with minimum diameter examineable [mm]
      Magnification referred to a 14" monitor Field of view on
any monitor

VCR-SL and VCR-ZL
  SE-10 *
10X
24x18 mm 
  SE-15 *
15X
18.2x13.6 mm 
  SE-20 *
20X
15x11.8 mm 
A-25
25X
11.0x8.7 mm 
D-50
50X
5.5x4.2 mm 
F-75
75X
3.6x2.7 mm 
G-100
100X
2.7x2.0 mm 
H-150
150X
1.8x1.4 mm 
♦ 200-P
200X
1.3x0.98 mm 
♦ 250-P
250X
1.0x0.75 mm 
320-P
320X
0.85x0.64 mm 
475-P
475X
0.55x0.42 mm 
750-P
750X
0.35x0.26 mm 
1100-P
1100X
0.25x0.19 mm 
1500-P
1500X
0.16x0.12 mm 
2350-P
2350X
0.12x0.09 mm 
♦ Utilizable objectives with coaxial light too.
Escursion on the "Z" axis of the VCR = 23mm.
Other objectives are available on request.

* This objective is utilizable only with STAND-SE and JUMBO.

Note: It's possible to inspect cylinders with minimum diameter less than 115 mm using adequate supports as in the following examples.


HIGH DEFINITION AND LONG WORKING DISTANCE OBJECTIVES
(about 80 mm) to be used with the special illuminator code SPT OVT 000620


Objectives
(magnetic connection)
Magnifications with Microcamera 1/3" and 1/2"
Magnification
referred to a 14" monitor
Field of view
on any 4:3 monitor


CCD
1/3"
CCD
1/2"
CCD
1/3"
CCD
1/2"
LDH-10
10X
8X
25x18 mm
34x25 mm
LDH-15
16X
12X
17.5x12.5 mm
23x16.5 mm
LDH-50
50X
38X
5.5x4.2 mm
7x5.3 mm
LDH-100
100X
75X
2.7x2 mm
3.7x2.8 mm
LDH-200
215X
170X
1.2x0.9 mm
1.6X1.2 mm
LDH-300
290X
215X
1.0x0.7 mm
1.2X1 mm
LDH-400
425X
300X
0.6x0.5 mm
0.9x0.7 mm
LDH-500
550X
375X
0.5x0.35 mm
0.7x0.5 mm
The values reported on the tables could be lightly different (5-10%) due to the optical and mechanical different series.


Cold Light Ring 48
Powerful 24 leds illuminator with magnetic connection complete of luminous intensity variator. The optimal lighting is included between a distance of 100 and 200 mm from the target. The leds mounted on the Cold Light Ring 24 and 48 have been calibrated to work unremittingly for about 20,000 hours.
code SPT OVT 000622


ILLUMINATION ZOOM OBJECTIVES MECHANICAL STAGES