AVAILABLE STANDARD OBJECTIVES (magnetic mount) FOR VCR-SL
| ![]() |
Click on the keys
|
||||||||
Every key of the keyboard, represents an image taken using the choosen magnification.
|


AVAILABLE OBJECTIVES FOR VCR-SL WORKING WITH ANNULAR LIGHT
Interchangeable objectives with magnetic mount |
Microcamera with CCD 1/3" | Cylinder with minimum diameter examineable [mm] | ||
![]() |
Magnification referred to a 14" monitor | Field of view on any monitor![]() |
![]() |
|
VCR-SL | ||||
![]() |
A-25 |
25X |
11,0x8,7 mm |
![]() |
D-50 |
50X |
5,5x4,2 mm |
||
F-75 |
75X |
3,6x2,7 mm |
||
G-100 |
100X |
2,7x2,0 mm |
||
H-150 |
150X |
1,8x1,4 mm |
||
♦ 200-P |
200X |
1,3x0,98 mm |
||
♦ 250-P |
250X |
1,0x0,75 mm |
||
♦ 320-P |
320X |
0,85x0,64 mm |
||
♦ 475-P |
475X |
0,55x0,42 mm |
||
♦ 750-P |
750X |
0,35x0,26 mm |
||
♦ 1100-P |
1100X |
0,25x0,19 mm |
||
♦ 1500-P |
1500X |
0,16x0,12 mm |
||
♦ 2350-P |
2350X |
0,12x0,09 mm |
♦ Utilizable objectives with coaxial light too. Escursion on the "Z" axis of the VCR = 23mm. Other objectives are available on request. Note: It's possible to inspect cylinders with minimum diameter less than 115 mm using adequate supports as in the following examples. |
![]() |
Objectives for special applications are available on request |
FOR A CORRECT ILLUMINATION PLEASE REFER TO THE FOLLOWING EXAMPLE | ||
![]() |
||
YES | NO | YES |
OTHER POSSIBLE APPLICATIONS
![]() |
![]() |
![]() |
Distance between the lighting source and the plane |
Best working distance between a cylinder's surface and the lighting source (Ø min 115mm) |
Position the cylinder must have when it has a diameter less than 115mm |
![]() |
![]() |
![]() |
Objects' maximum height if placed on a flat surface: 7mm |
Position of the rising supports (prisms) for the inspection of objects with height between 12 and 32mm |
Position of the prisms for the inspection of objects with height between 42 and 62mm |
![]() |
![]() |
![]() |
Inspections of multilayered sheets or of very thin profiles through the use of prisms and magnetic STAND UPs |
Support (prism) for the inspection of small cylindric objects |
![]() |
Practical example of employment of a VCR with PRISMS and STAND-UP
![]() |