EXPLORE
SEE ALSO

AVAILABLE STANDARD OBJECTIVES (magnetic mount) FOR VCR-SL

 


AVAILABLE OBJECTIVES FOR VCR WORKING WITH ANNULAR LIGHT

Interchangeable objectives
with magnetic mount
Microcamera with CCD 1/3" Cylinder with minimum diameter examineable [mm]
Magnification referred to a 14" monitor Field of view on any monitor

VCR-SL
A-25
25X
11,0x8,7 mm 
D-50
50X
5,5x4,2 mm 
F-75
75X
3,6x2,7 mm 
G-100
100X
2,7x2,0 mm 
H-150
150X
1,8x1,4 mm 
♦ 200-P
200X
1,3x0,98 mm 
♦ 250-P
250X
1,0x0,75 mm 
320-P
320X
0,85x0,64 mm 
475-P
475X
0,55x0,42 mm 
750-P
750X
0,35x0,26 mm 
1100-P
1100X
0,25x0,19 mm 
1500-P
1500X
0,16x0,12 mm 
2350-P
2350X
0,12x0,09 mm 
♦ Utilizable objectives with coaxial light too.
Escursion on the "Z" axis of the VCR = 23mm.
Other objectives are available on request.

Note: It's possible to inspect cylinders with minimum diameter less than 115 mm using adequate supports as in the following examples.


FOR A CORRECT ILLUMINATION PLEASE REFER TO THE FOLLOWING EXAMPLE
YES NO YES


OTHER POSSIBLE APPLICATIONS

Distance between the lighting source and the plane
Best working distance between a cylinder's surface and the lighting source (Ø min 115mm)
Position the cylinder must have when it has a diameter less than 115mm

Objects' maximum height if placed on a flat surface: 7mm
Position of the rising supports (prisms) for the inspection of objects with height between 12 and 32mm
Position of the prisms for the inspection of objects with height between 42 and 62mm

Inspections of multilayered sheets or of very thin profiles through the use of prisms and magnetic STAND UPs
Support (prism) for the inspection of small cylindric objects


Practical example of employment of a VCR with PRISMS and STAND-UP