WORKING WITH ANNULAR LIGHT "LITE" AND "PROFESSIONAL"
The possibility of inspecting any type of surface with all the wide range of available objectives of the VCR series (25x/2350x) and of the high definition series (LDH), will give a safe certainty to the operator to be able to use his device in almost all the occasions.
The difference between the set for annular light Professional and the annular light Lite one is the possibility, for the Professional, of selecting 14 different angulations of origin of the lightings around the subject so as to be able to search every particular and make the image visible and stereoscopic as in the example:
The use of the angulated light is suggested also to give prominence to the harshnesses or the conformation of the various surfaces. |
|  |
Click on the keys
|
||||||||
Every key of the keyboard, represents an image taken using the choosen magnification.
|
||||||||||
VCR-Z LITE SYSTEM
with interchangeable objectives with magnetic mount
VCR-ZL and VCR-ZL P
VCR-ZL with annular light Lite |
VCR-ZL P with annular light PRO |
 |
 |
STANDARD OBJECTIVES FOR VCR-ZLite WORKING WITH ANNULAR LIGHT
| Interchangeable objectives with magnetic mount |
Microcamera with CCD 1/3" | Cylinder with minimum diameter examineable [mm] | ||
  |
Magnification referred to a 14" monitor | Field of view on any 4:3 monitor  |
 |
|
| VCR-ZL and VCR-ZL P | ||||
 |
VCR-15 * |
15X |
18x13 mm |
 |
A-25 |
25X |
11.0x8.7 mm |
||
D-50 |
50X |
5.5x4.2 mm |
||
F-75 |
75X |
3.6x2.7 mm |
||
G-100 |
100X |
2.7x2.0 mm |
||
H-150 |
150X |
1.8x1.4 mm |
||
♦ 200-P |
200X |
1.3x0.98 mm |
||
♦ 250-P |
250X |
1.0x0.75 mm |
||
♦ 320-P |
320X |
0.85x0.64 mm |
||
♦ 475-P |
475X |
0.55x0.42 mm |
||
♦ 750-P |
750X |
0.35x0.26 mm |
||
♦ 1100-P |
1100X |
0.25x0.19 mm |
||
♦ 1500-P |
1500X |
0.16x0.12 mm |
||
♦ 2350-P |
2350X |
0.12x0.09 mm |
||
|
♦ Utilizable objectives with coaxial light too. Escursion on the "Z" axis of the VCR = 23mm. Other objectives are available on request. * With VCR-ZL P Note: It's possible to inspect cylinders with minimum diameter less than 115 mm using adequate supports as in the following examples. |
| FOR A CORRECT ILLUMINATION PLEASE REFER TO THE FOLLOWING EXAMPLE | |||
 |
|||
| YES | NO | YES | |
OTHER POSSIBLE APPLICATIONS
 |
 |
 |
Distance between the lighting source and the plane |
Best working distance between a cylinder's surface and the lighting source (Ø min 115mm) |
Position the cylinder must have when it has a diameter less than 115mm |
 |
 |
 |
Objects' maximum height if placed on a flat surface: 7mm |
Position of the rising supports (prisms) for the inspection of objects with height between 12 and 32mm |
Position of the prisms for the inspection of objects with height between 42 and 62mm |
 |
 |
 |
Inspections of multilayered sheets or of very thin profiles through the use of prisms and magnetic STAND UPs |
Support (prism) for the inspection of small cylindric objects |
 |
Practical example of employment of a VCR-Z with PRISMS and STAND-UP
 |
