AVAILABLE STANDARD OBJECTIVES (magnetic mount) FOR VCR-Z
| ![]() |
Click on the keys
|
||||||||
Every key of the keyboard, represents an image taken using the choosen magnification.
|

AVAILABLE OBJECTIVES FOR VCR-ZP WORKING WITH ANNULAR LIGHT
Interchangeable objectives with magnetic mount |
Microcamera with CCD 1/3" |
Cylinder with minimum diameter examineable [mm] |
Maximum examineable depth [mm] |
||
![]() |
Magnification referred to a 14" monitor |
Field of view on any 4:3 monitor ![]() |
![]() |
![]() |
|
VCR-ZP |
|||||
![]() |
VCR-15 |
15X |
18x13 mm |
115 * |
9 |
B-30 |
30X |
9.0x6.7 mm |
80 |
3 |
|
D-50 |
50X |
5.5x4.2 mm |
80 |
1 |
|
F-75 |
75X |
3.6x2.7 mm |
80 |
- |
|
G-100 |
100X |
2.7x2.0 mm |
100 * |
8 |
|
H-150 |
150X |
1.8x1.4 mm |
80 |
- |
|
♦ 200-P |
200X |
1.5x1.1 mm |
215 |
10 |
|
♦ 250-P |
250X |
1.0x0.75 mm |
80 |
- |
|
♦ 320-P |
320X |
0.85x0.64 mm |
85 * |
5 |
|
♦ 475-P |
475X |
0.55x0.42 mm |
85 * |
5 |
|
♦ 750-P |
750X |
0.35x0.26 mm |
80 |
3 |
|
♦ 1100-P |
1100X |
0.25x0.19 mm |
85 * |
5 |
|
♦ 1500-P |
1500X |
0.16x0.12 mm |
95 * |
7 |
|
♦ 2350-P |
2350X |
0.12x0.09 mm |
80 |
4 |
♦ Utilizable objectives with coaxial light too. Escursion on the "Z" axis of the VCR = 23mm. Other objectives are available on request. * can examine also cylinders having a minimum diameter of 80 mm only if coupled with spacer ring (code SPT OVT 000399). Note: It's also possible to inspect cylinders with minimum diameter less than 115 mm using adequate supports as in the following examples. |
![]() |
Objectives for special applications are available on request |
FOR A CORRECT ILLUMINATION PLEASE REFER TO THE FOLLOWING EXAMPLE | |||
![]() |
|||
YES | NO | YES |
OTHER POSSIBLE APPLICATIONS
![]() |
![]() |
![]() |
Distance between the lighting source and the plane |
Best working distance between a cylinder's surface and the lighting source (Ø min 115mm) |
Position the cylinder must have when it has a diameter less than 115mm |
![]() |
![]() |
![]() |
Objects' maximum height if placed on a flat surface: 7mm |
Position of the rising supports (prisms) for the inspection of objects with height between 12 and 32mm |
Position of the prisms for the inspection of objects with height between 42 and 62mm |
![]() |
![]() |
![]() |
Inspections of multilayered sheets or of very thin profiles through the use of prisms and magnetic STAND UPs |
Support (prism) for the inspection of small cylindric objects |
![]() |
Practical example of employment of a VCR-Z with PRISMS and STAND-UP
![]() |